Breaking Systems
Showing all 16 results
-
Breaking SystemsBrake Controller PRODIGY
Allows application of more initial braking power when towing heavier trailers
Works proportionally in reverse to assist reverse parking
Inertia control works proportionally in reverse – great for backing into tough spots
Dimensions: 115mm(l) x 27mm(h) x 80mm(d)
1 Year Warranty
Weight: 520g
(0 reviews)AUD $330.00 Add to cart -
Breaking SystemsBrake Controller SENTINEL
Digital display, solid state, no moving parts, no hydraulic connections, no levelling required.
Compact size, mounts anywhere inside passenger compartment.
Advanced internal circuit protection to prevent damage if incorrectly wired
(0 reviews)AUD $250.00 Add to cart -
Breaking SystemsBrake Controller TEKONSHA
GENUINE TEKONSHA Brake Controller P3 is the most advanced and intelligent approach to trailer brake controls. P3, requiring no manual levelling, is a technological breakthrough among inertia-activated brake controls. Equipped with a self-adjusting sensing device similar to the one used in guided-missile technology to allow for easy, flexible installation from nearly horizontal to nearly vertical P3 constantly adjusts itself to the position of the tow vehicle.
(0 reviews)AUD $352.00 Add to cart -
Breaking SystemsBrake Controller VOYAGER
Compact and easy to install. Mounting kit included
Minimises false braking
Suits 2-4 magnets.
(0 reviews)AUD $200.00 Add to cart -
Breaking SystemsBreakaway Coil Cable with Pin & Release Clip
Comes with pin and release clip
(0 reviews)AUD $22.50 Add to cart -
Save 11%
Breaking SystemsBreakaway Kit – 6000 Breaksafe
Automatically recharges when connected to tow vehicle
Compact and easy to install
Fitted to the dash of the tow vehicle and check condition of the breaksafe battery each time pedal is pressed
Monitor Dimensions: 64mm(w) x 25mm(h) x 50mm(d)
1 Year Warranty
Weight: 80g
(0 reviews)AUD $331.00 Add to cart -
Breaking SystemsBreakaway Switch – TEKONSHA
Replacement switch only. For full kit, see Brake Controller TEKONSHA – Applies electric brakes automatically when accidental trailer breakaway from the towing vehicle occurs
(0 reviews)AUD $35.00 Add to cart -
Save 16%
Breaking SystemsBreaksafe Battery
Dimensions: 93mm(h) x 65mm(w) x 152mm(l)Power: 12V, 7Ah1 Year Warranty(0 reviews)AUD $59.00 Add to cart -
Breaking SystemsBreaksafe REM Monitor
This is an add-on for BREAKSAFE break-away system, and suits Breaksafe 5000, 5000XP, 6000, 6000XP
The rear has two wire connections: 1 for Earth and 1 for the Sensor
Mounting screws and double sided tape
Dimensions: 64mm(w) x 25mm(h) x 50mm(d)
(0 reviews)AUD $91.00 Add to cart -
Breaking SystemsCamec Break Away System Replacement Battery
The electronic circuitry in the Camec Remote Battery Monitor Part # 041764 has been designed to work specifically with the Camec Break Away System Part # 040119 only.
It is highly recommended that the Camec Remote Battery Monitor is installed by a qualified Auto Electrician only.
Camec as such will not warrant the product if used in conjunction with any other Break Away System.
Dimensions: 100mm x 90mm x 70mm
Power: 12V | 5ah
AVAILABLE END OF APRIL
(0 reviews)AUD $35.50 Add to cart -
Save 18%
Breaking SystemsCAMEC Breakaway System
Overall size: 170mm x 125mm x 85mm
Power: 5AH battery included
Suitable for Single and Dual Axle
(0 reviews)AUD $131.00 Add to cart -
Breaking SystemsHayman Reece Compact Brake Controller
Electric trailer brake control for 1-3 Axles
Plug & Play feature allows for quick and easy connection with the Hayman Reese Smartclick brake control harness
Compact size
(0 reviews)AUD $305.00 Add to cart -
Breaking SystemsHopkins Break Away Kit
Built-in battery charger charges battery while plugged into vehicle
Simple 3-wire installation
(0 reviews)AUD $89.00 Add to cart -
Save 20%
Breaking SystemsLippert Sway Command Kit
Trailer Requirements:
- Trailer Weight: 1100kg – 5900kg
- Trailer Length: 15 – 40ft
- Number of Axles: 1 – 2 Axles
- Only Electric Drum Brakes
(0 reviews)AUD $662.00 Add to cart -
-
